Trailer wireharness help!?
So i am towing a 1987 s10 with my 1998 Chevy blazer. I hooked up a 4 pin wire harness to the blazer and i took the other part of the 4 pin wire harness and hooked it to the s 10 so when i turn and brake and such the s 10 lights will come on. Well the car dolly i have is a master tow 80thd. It has electric brakes and a 6 pin harness. Well my question is, how can i wire the electric brakes into my blazer so they will work? I don’t want to cut the harness off and i don’t mind running another wire on the blazer or something. Just looking for options!
well i know they make the adapters. But where would i run the blue wire from? i dont understand what a brake controller is? is it the thing that the brake pedal pushes to make the lights come on??
Im not using the dollys lights cause one is busted and i dont want to buy a new fender because thats what ti takes to replace i and a new fender is 103 bucks!
If the truck that is doing the towing is not set up for electric brakes than it cannot be done, you cannot use the blue wire….
